You have no items in your shopping cart.


The Tool & Equipment Super Store!
Se Habla Español
Financing Available - Call for more information

BendPak MDS-6KF Flush Mount Mid Rise Scissor Lift

Double click on above image to view full picture

More Views


BendPak MDS-6KF Flush Mount Mid Rise Scissor Lift

Free Shipping

SKU: 119626

Financing Available!

Quick Overview

The MDS-6KF scissor lift by BendPak is an innovatively-designed car lift with the option to be placed above ground or flush mount over a pit. It has the ability to be used at three different heights in order to provide auto techs with supportive working positions.

This mid-rise lift can reach up to 45.5 inches when it’s on top of lift blocks in just 35 seconds. It can reach maximum height in a short amount of time because of its hydraulic and equalizing cylinders. It’s 18.5 inches wide and 79.5 inches long and has a maximum weightlifting capacity of 6,000 lbs.

BendPak MDS-6KF Flush Mount Mid Rise Scissor Lift is available for purchase in increments of 1



Product Description

BendPak’s 6,000‐pound capacity MDS‐6KF models are open‐center mid‐rise auto‐ maintenance lifts for servicing passenger cars, SUV’s and light trucks. The exclusive open‐center design of the MDS‐6KF not only allows full unobstructed access to the underside of the car, but is also clear of frame cross members on the floor that are typical with other mid‐rise lifts. This fully open‐center design, both top and bottom, makes the MDS‐6K a clear leader in convenience and work productivity. Flush mount your lift in the floor for a smooth sub‐surface installation.

The MDS-6KF features wide lifting platforms combined with durable cushioned‐rubber contact blocks. Simply drive the vehicle over the lowered scissor ramps and position the soft and durable rubber blocks under the vehicle lifting points for fast and easy vehicle positioning and set‐up. The user‐friendly power console features simple operator controls like up, down, and safety lock buttons. A small footprint, easy installation and adaptable 110V/240V power unit makes the MDS‐6KF the perfect lift that fits any shop or home garage. 

Product Features

 Each lift platform features four solid steel-scissor frame support bars making it the strongest mid-rise lift in its class.
• Dual master hydraulic cylinder combined with dual equalizing cylinders provides a safe and level 6,000 pound lifting capacity.
• Solid‐steel safety lock bars engage automatically during ascent.
• Convenient stainless‐steel pneumatic cylinders simultaneously release safety locks during descent with a simple push of a button. (NOTE: Requires min. 50 PSI, 10‐CFM air source at time of installation.)
• A push‐button safety lock release system is operated away from the lift and allows operators to safely deactivate the locks without the need to push or pull cumbersome release bars or lock release handles.
 Hinge point features Zerk grease fitting to allow lubrication at critical wear areas.
• Comes standard with four durable cushioned‐rubber contact blocks providing fast vehicle set‐up.
• Three locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue.
 Powder coat finish provides a long lasting durable finish.
 Included with every lift are detailed installation and maintenance instructions, graphic safety decals, maintenance decals, vehicle lifting point guide and a safety instruction placard to train personnel on proper safety procedures and maintenance guidelines.

Technical Specs

  • Lifting capacity: 6,000 lbs. / 2,722 kg
  • Lifting height less lift blocks: 44" / 1,119 mm
  • Lifting height with lift blocks: 45.5" / 1158 mm
  • Lifting time: 35 sec
  • Lower Lock Position: 18.7" (-4.25" for sub-floor install)
  • Middle Lock Position: 29.7" (-4.25" for sub-floor install)
  • Upper Lock Position: 40" (-4.25" for sub-floor install)
  • Motor: 110 - 240 VAC / 50 - 60 Hz / 1 Ph*
  • Overall Width: 18.5" / 470 mm
  • Overall Length: 79.5" 

You may also be interested in the following product(s)