Se Habla Español - Financing Available - Call for more information
888-437-5438

Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

0

Bendpak XPR-12CL-192 2 Post Car Lift

Double click on above image to view full picture

More Views

 

Bendpak XPR-12CL-192 2 Post Car Lift

SKU: 120324

$5,515.00
Financing Available!

Quick Overview

The BendPak XPR-12C-192 2 post car lift was modeled after the BendPak XPR-12C. However, the XPR-12C-192 has an additional 192 inches of height clearance. This 12,000 lb. max capacity, hydraulic car lift, has a clear floor to allow unobstructed movement when working on lifted vehicles.


Although the columns are symmetrical, the lift’s width can be extended to both accommodate wider vehicles and to alleviate any dings that might come from opening the car doors.


Triple-Telescoping arms increase the reach of the lift so that a greater variety of vehicle can be worked on. With an increased height capacity and the ability to enlarge the width of the 2 post lift, there’s really no type of vehicle under 12,000lbs. that the XPR-12C-192 can’t handle.

Extra Tall, 12,000 Lb. Capacity, Clearfloor, Triple-

OR

OR

Product Description

The safe and rugged XPR-12CL-192 two-post lift features extended height columns for added overhead clearance and an adjustable top beam to accommodate wide or narrow installation set-ups. The highly sophisticated yet simple and dependable XPR-Series design requires very little service or maintenance for an overall lower cost of ownership. All BendPak's XPR two-post models feature dual "direct-drive" low-pressure cylinders, maintenance-free UHMW load bearings, single-piece columns, extra-tall lifting carriages and triple-telescoping arm configurations for increased arm positioning versatility.

Our newest line of XPR-Series 2-Post lifts offers a wide selection of durable, safe and reliable systems for virtually every lifting application. Specifically, the powerful and secure super-duty XPR-12CL-192 is an incredibly rapid lift with a robust menu of features to increase efficiency and productivity, without overwhelming you with serviceable parts and necessary maintenance. The results are lower operating expenses and higher productivity. If you're looking to make more money in less time than ever before, you'll find that the new XPR-12CL-192 lift is the perfect addition to your shop— especially when you work with heavier vehicles that require larger lifting capacities.

But just because this super-duty model was designed for the big stuff doesn't mean it can't handle your light-duty work as well. The two-post XPR-12CL-192 easily has the capacity to lift your largest full-sized pickups and commercial vehicles, yet still provide specific capability for sport and compact cars, both foreign and domestic. The XPR-12CL-192 is a 12,000-lb. maximum capacity, close-top model lift with full-reach arms that collapse to standard lengths and lower lift pads that clutch standard passenger automobiles, yet still hold the big guys as well. The columns are also placed wider for trucks with fixed towing mirrors, and the overhead equalization beam is up and out of the way for those "high-cube" delivery vans. Sound complicated to operate? Don't worry. When it comes to ease of use, our dual-synchro equalization system and user-friendly controls are the stuff of legends.

All of BendPak's heavy-duty clearfloor model lifts feature dual "direct-drive" low-pressure cylinders that minimize leakage and reduce the workload placed on the entire hydraulic system. This exclusive BendPak design feature saves you maintenance costs throughout the life of your lift—you aren't going to find friendly sensibility like this anywhere else. Some more BendPak XPR-Series exclusives include: 16 individual maintenance-free UHMW load bearings, single-piece columns, triple-telescoping arms, extra-tall lifting carriages and oversized cable sheaves to vastly extend the life expectancy of moving suspension components. And, to better cater to your specific lifting needs, we offer similar model lifts with optional specialty arm configurations.

Product Features

  • Extended overhead height provides additional clearance for high-profile vehicles
  • 12,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Padded overhead safety shutoff bar
  • Extended height top-beam provides greater overhead clearance
  • Single-point safety release
  • Dual direct-drive hydraulic cylinders
  • Dual-synchro equalization system for equal lifting
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Oversized A36 steel base plates
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • Durable, rubber lift pads with stackable adapters
  • Multi-piece adapter set includes four 6" stackable adapters, four 3" stackable adapters, four polyurethane contact pads and four frame cradle pads. Ideal for trucks and vans with running boards or auxiliary fuel tanks
  • Convenient storage is included for truck and van adapters
  • Triple-telescoping arms provide increased range for lifting point access
  • Versatile drop-in contact pads with stackable adapters

Technical Specs

  • Lifting capacity*: 12,000 lbs. / 5,443 kg    
    • *Max capacity / front axle: 6,000 lbs. / 2,722 kg
    • *Max capacity / rear axle: 6,000 lbs. / 2,722 kg
  • Overall height: 192" / 4,877 mm
  • Overall width (outside of base plate): 155" / 3,937 mm
  • Width (outside of columns): 144" / 3,658 mm
  • Floor to overhead switch: 187.7” / 4,801 mm
  • Inside columns: 120" / 3,048 mm
  • Front arm min reach: 32" / 813 mm
  • Front arm max reach: 60" / 1,524 mm
  • Rear arm min reach: 32" / 813 mm
  • Rear arm max reach: 60" / 1,524 mm
  • Min pad height: 5" / 127 mm
  • Rise: 69" / 1,753 mm
  • Lift height max (pad only): 74" / 1,880 mm
  • Lift height max (6" adapter): 80" / 2,032 mm
  • Drive-thru clearance: 106" / 2,592 mm
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 45 sec
  • Max load per arm: 3,000 lbs. / 1,361 kg
  • Shipping weight: 2,588 lbs. / 1,176 kg
  • Shipping dimensions: 172" x 29" x 54" / 4,369 mm x 737 mm x 1,372 mm

* CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493. Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

You may also be interested in the following product(s)