Product Description
Dependable design
4 heavy-duty, high-quality, stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway makes this lift the most durable, maintenance-free lifting system on the market.
Dual-hub cable sheaves
Reduce stress and fatigue on the axles, sheaves and cables. We insist on using dual-hub cable sheaves, even if they cost us more to make. When you buy BendPak, we throw in peace of mind as a free gift.
Multi-level locking positions
The HD-7PXW is equipped with multiple adjustable height locking positions for variable-height parking. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.
Heavy-duty aircraft cable
Each lift is supplied with 4 high-quality stainless steel lifting cables, rated at 14,400 lbs. each. The combined rating of these cables is more than 822% of the maximum lifting capacity of the entire lift! And we make sure it looks tidy too—all lifting cables are fully enclosed within the lift structure itself.
Electric / hydraulic power system
We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.
Large base plates
10" x 12" base plates provide a solid foundation for the HD-7P.
Product Features
- 7,000-lb. maximum lifting capacity
- Super-tall lift
- Runways include outside guide rails
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- High-speed lifting
- Features heavy-duty 3/8" aircraft cable
- Rugged 1-1/4" roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Runways feature non-skid surface
- Push-button pneumatic safety release
Technical Specs
Configuration Wide / Super-Tall Rise
Lifting Capacity 7,000 Lbs. / 3175 Kg.
Max Capacity / Front Axle 3,500 Lbs. / 1588 Kg.
Max Capacity / Rear Axle 3,500 Lbs. / 1588 Kg.
A - Overall Width 110-1/4" / 2800 mm.
B - Outside Length 198” / 5029 mm.
C - Overall Length 213” / 5410 mm.
D - Height of Columns 158” / 4011 mm.
E – Min. Runway Height 4-1/2” / 114 mm.
F – Max. Rise 140” / 3556 mm.
G - Max. Lifting Height 145” / 3685 mm.
H - Width Between Columns 100‐1/4” / 2,555 mm.
I - Runway Width 19” / 483 mm.
J - Width Between Runways (*) NARROW 37-1/2" / 952 mm.
J - Width Between Runways (*) WIDE 44-3/8" / 1127 mm.
K - Runway Centerline (*) NARROW 56-1/2" / 1435 mm.
K - Runway Centerline (*) WIDE 63-3/8" / 1610 mm.
L - Outside Edge of Runways (*) NARROW 75-1/2" / 1918 mm.
L - Outside Edge of Runways (*) WIDE 82-3/8" / 2092 mm.
M - Drive-Thru-Clearance 86-1/2" / 2197 mm.
N - Length of Runways 188" / 4775 mm.
Min. Wheelbase @ Rated Capacity 135" / 3429 mm.
Min. Wheelbase @ 75% Capacity 115" / 2921 mm.
Min. Wheelbase @ 50% Capacity 95" / 2413 mm.
Min. Wheelbase @ 25% Capacity 80" / 2032 mm.
Locking Positions 30
Lock Spacing Every 4" / 102 mm.
Lifting Time 60 Seconds
Standard Motor (**) 208-230 VAC / 50-60 Hz. / 1Ph.
You may also be interested in the following products
Prices and specifications subject to change without notice.