You have no items in your shopping cart.


The Tool & Equipment Super Store!
Se Habla EspaƱol
Financing Available - Call for more information
  • GES Automotive Lifts 2019

 Bendpak XPR-10AS-LP 2 Post Car Lift

Double click on above image to view full picture

More Views

Bendpak XPR-10AS-LP 2 Post Car Lift

SKU : 120315

A 2 post car lift that is able to handle almost any vehicle under 10,000 lbs, BendPak’s XPR-10AS-LP is a must-have for auto shops and car enthusiasts with hard-core

A 2 post car lift that is able to handle almost any vehicle under 10,000 lbs, BendPak’s XPR-10AS-LP is a must-have for auto shops and car enthusiasts with hard-core garages.

Universal car lifts are few and far between, but because of its width extensions and low profile arms, the XPR-10AS-LP can handle almost anything; large or small, tall or short, wide or narrow.

This 2 post lift can be installed in a narrow or wide configuration to offer a wider lifting capacity and drive-thru clearance. The auto lift’s columns attach to arms that can get extremely close to the ground to get under vehicles with low ground clearances, such as Corvettes and Mini Coopers. Arm extensions are included with this two post lift in two sizes so that it can also accommodate vehicles with extremely high ground clearances.

This asymmetrical lift allows shop techs to open doors without dinging them and increases better access to inside of the vehicle. Lift arms are also equipped with pads to prevent door dings.

The XPR-10AS-LP includes safety features for both mechanic and car. As the lift rises, safety locks click into place every 3 inches; in case of hydraulic failure. To ensure the safety of the vehicle, if the car reaches a certain point on the lift, pressure will be put upon a padded bar, which immediately turns off the lift.

If you’re looking for a heavy-duty car lift that can handle a wide range of vehicles, the XPR-10AS-LP is the lift for you.

Add to Cart



Product Description

Rugged Enough for Full-Size Trucks - Low-Enough for Sports Cars 

Our XPR-10AS-LP asymmetric two-post lift features our exclusive Low-Pro™ arms that accommodate lowered sports cars and those vehicles with exclusive lift points located on the extreme outer edges of the chassis. A telescoping overhead structure provides the convenience of wide or narrow installation wrapped up into one configurable package. This durable, safe and reliable car lift features Tru-Metric arms to suit virtually every vehicle lifting requirement. The powerful and secure XPR-10AS-LP is an incredibly rapid lift with a robust menu of features to increase efficiency and productivity. A simple, yet highly sophisticated lift design keeps service and maintenance costs to a minimum, delivering lower operating expenses and higher productivity. If you're looking to make more money in less time than ever before, you'll find that the new XPR-10AS-LP two-post lift is the perfect addition to your shop.

This true asymmetric lift features 30° rotated columns for added door-opening clearance and interior car access. The exclusive Tru-Metric carriage and arm design combines to give users the ability to load vehicles either symmetrically (centerline of vehicle at column) or asymmetrically (centerline of vehicle behind column). 

This super-industrial-strength piece of equipment has got it all: cutting-edge technology, top of the line materials, design that's ahead of its time and a 10,000 pound lifting capacity. Fits in shops with ceilings higher than 12', and it won't crowd your floor while you work beneath a vehicle.


Product Features

  • Lift arms shown with optional foot guards 
  • 10,000-lb lifting capacity
  • Telescoping Low-Pro™ arms accommodate lowered sports cars and those vehicles with lift points located on outer edges of the chassis
  • Expandable top beam accommodates wide or narrow drive-thru configuration 
  • Padded overhead safety shutoff bar
  • Exclusive Tru-Metric arm design for more versatile arm positioning
  • 30° rotated single-piece columns
  • Single-point safety release
  • Dual hydraulic direct-drive cylinders
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 3/8" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 8-piece truck and van adapter set comes standard
  • Versatile drop-in contact pads with stackable adapters
  • Meets or exceeds the standards prescribed by ANSI/ALI ALCTV-2011
Technical Specs

Technical Specs

  • Weight: 1778 kg
  • Lifting capacity*: 10,000 lbs. / 4,536 kg
    • *Max capacity / front axle: 5,000 lbs. / 2,268 kg
    • *Max capacity / rear axle: 5,000 lbs. / 2,268 kg
  • Overall height: 145" / 3,683 mm
  • Overall width - NARROW CONFIG: 137" / 3,353 mm
  • Overall width - WIDE CONFIG: 145" / 3,683 mm
  • Width (outside of columns) - NARROW: 133" / 3,251 mm
  • Width (outside of columns) - WIDE: 141" / 3,581 mm
  • Floor to overhead switch*: 141" / 3,581 mm
  • Inside columns - NARROW: 104" / 2,515 mm
  • Inside columns - WIDE: 112" / 2,845 mm
  • Front arm min reach: 23-1/2" / 597 mm
  • Front arm max reach: 38-1/2" / 978 mm
  • Rear arm min reach: 34-1/2" / 876 mm
  • Rear arm max reach: 54-1/2" / 1,384 mm
  • Min pad height: 4.25" - 6-3/4" / 89 mm
  • Rise: 69" / 1,753 mm
  • Lift height max (pad only): 73" - 75"/ 1,854 mm
  • Lift height max (3" adapter): 75.5" - 77.5" / 2,007 mm
  • Drive-thru clearance - NARROW: 94" / 2,261 mm
  • Drive-thru clearance - WIDE: 102" / 2,591 mm
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 45 sec
  • Max load per arm: 2,500 lbs. / 1,134 kg

You may also be interested in the following products

Prices and specifications subject to change without notice.