You have no items in your shopping cart.


The Tool & Equipment Super Store!
Se Habla EspaƱol
Financing Available - Call for more information
  • GES Automotive Lifts 2019

Bendpak XPR-9S-LP 2 Post Car Lift

Double click on above image to view full picture

More Views

Bendpak XPR-9S-LP 2 Post Car Lift

SKU : 120310

The BendPak XPR-9S-LP 2 post car lift has all of the features of the XPR-9S, plus Low-Pro™ arms that are able to accommodate lowered sports cars and vehicles that have to be

The BendPak XPR-9S-LP 2 post car lift has all of the features of the XPR-9S, plus Low-Pro™ arms that are able to accommodate lowered sports cars and vehicles that have to be lifted on the outermost edges of their chassis. These low pro arms have an adjustable reach, ranging from 28.5 inches to 47.5 inches. Its flexibility in arm reach allows this 2 post lift to hold an even larger range of vehicle than the BendPak XPR-9S.

The XPR-9S-LP has a floorplate, which enables it to have short columns while maintaining a large weight-bearing capacity of 9,000 lbs. This BendPak lift was intentionally designed short so it could fit into auto shops and home garages with low ceilings.

If you like the XPR-9S-LP, but you specialize in vehicles that have high clearances, check out the BendPak XPR-9S 2 post car lift. It has all of the features that are included with the XPR-9S-LP 2 post lift without low profile arms.

Add to Cart



Product Description

Every XPR-9S-LP two-post car lift comes with:

Free truck and van adapters
Other lift manufacturers might charge extra for these necessary adapters, but come standard with every XPR-Series Car Lift. Ideal for use with trucks and vans that employ running boards or auxiliary fuel tanks.


Telescoping Low-Pro arms.
The safe and rugged XPR-9S-LP two-post lift features our exclusive Low-Pro™ armsthat accommodate lowered sports cars and those vehicles with exclusive lift points located on the extreme outer edges of the chassis. 




Lowered arm tube supports
To minimize the chance of damaging vehicles with low-hanging vehicle doors, we completely redesigned our two-post lift arm tube supports to allow for better clearance.

Automatic arm restraints
Each lifting arm is equipped with durable lift arm restraints that automatically engage each time the lift is raised. When the two-post auto lift is lowered, the gear arm restraints automatically disengage to provide easy positioning of the lift arms.

Maintenance-free load bearings
Rather than using roller bearings that need to be constantly lubricated, every XPR-Series Lift carriage uses high-tech UHMW (ultra-high molecular weight polyethylene) load bearings that never need lubrication and are designed to last the entire life of the lift.

Single-piece columns
We specifically manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.

Wide or narrow selection
Wide or narrow car lift configurations are available, allowing you to maximize your floor space. 

On the level
Our dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition.

Industrial-grade hydraulic cylinders
Integrated into every XPR-Series hydraulic cylinder is a one-piece, pilot fitted, machined steel piston that is wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The micro-smooth chrome rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001” diametrically, ensuring superior cylinder operation and life. The superior high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time.

High-speed hydraulics
Free-flow, high-pressure 3/8” hydraulic lines, a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for enhanced productivity. 

Durable powder-coat finish
All XPR-Series Car Lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected before being sandblasted. Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate parts up to 25’ long. Once cleaned, they’re immediately dried to avoid rust production, and then outgassed. Outgassing pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal.  If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely will cause chips in the powder. After the parts are washed and outgassed, any surfaces and / or threaded holes that need to be masked or plugged, are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on an electrostatically grounded conveyor line. The powder is finally applied using an electrostatic spray gun. The powder “sticks” to the surface in a fashion similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400° F for 45 minutes.

Detailed instructions
Included with every BendPak car and truck lift are detailed installation and maintenance instructions, graphic safety decals, maintenance decals, vehicle lifting point guide and a safety instruction placard to train personnel on proper safety procedures and maintenance guidelines.    


Product Features

  • 9,000-lb lifting capacity
  • Shorter column for low-ceiling installations
  • Telescoping Low-Pro™ arms accommodate lowered sports cars and those vehicles with lift points located on outer edges of the chassis
  • Adjust able wide or narrow drive-thru configurations
  • Extended rise gives you over 6-feet of under clearance
  • Single-piece columns
  • Single-point safety release
  • Chain lifting system combined with dual hydraulic cylinders
  • Electric / hydraulic power system
  • Large 20" x 19" steel base plates
  • Self-lubricating dura-glide polyethylene bearing system
  • Safety locks in each column spaced every 3-inches
  • Automatic arm restraints
  • Heavy-duty dual 3/8" equalizer cables with oversize cable sheaves
  • Truck and van adapters standard
Technical Specs

Technical Specs

  • Weight: 1676 kg
  • Lifting capacity*: 9,000 lbs. / 4,082 kg
    • *Max capacity / front axle: 4,500 lbs. / 2,041 kg
    • *Max capacity / rear axle: 4,500 lbs. / 2,041 kg
  • Overall height: 113" / 2,870 mm
  • Width overall (NARROW CONFIG): 132" / 3,353 mm
  • Width overall (WIDE CONFIG): 145" / 3,683 mm
  • Width outside of columns (NARROW): 126-3/4" / 3,225 mm
  • Width outside of columns (WIDE): 139-3/5" / 3,555 mm
  • Floor pan height: 1-1/4" / 32 mm
  • Inside columns (NARROW): 105" / 3,208 mm
  • Inside columns (WIDE): 118" / 3,538 mm
  • Front arm min reach: 28-1/2" / 724 mm
  • Front arm max reach: 47-1/2" / 1,206 mm
  • Rear arm min reach: 28-1/2" / 724 mm
  • Rear arm max reach: 47-1/2" / 1,206 mm
  • Min pad height: 4" / 89 mm
  • Rise: 69" / 1,829 mm
  • Lift height max (pad only): 73" - 75" / 1,930 mm
  • Lift height max (3" adapter): 75.5" - 77.5"" / 2,083 mm
  • Drive-thru clearance (NARROW): 93" / 2,362 mm
  • Drive-thru clearance (WIDE): 106" / 2,692 mm
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 45 sec
  • Max load per arm: 2,250 lbs. / 1,021 kg

You may also be interested in the following products

Prices and specifications subject to change without notice.