Product Description
The D-10/ACX is ALI / ETL Certified. This wider version of the D-10/AC is for wider vehicles and drive-thru clearance. Still an asymmetric two-post lift, the posts are rotated 30 degrees and spaced further apart giving you the ability to open car doors without the dents. This two-post lift will be an asset to any repair facility it is installed in. In addition, this lift can be angled in narrow repair bays to accommodate other lifts.
One of Dannmar's highest selling two-post lift models, the D-10/ACX will out-perform others in its class at a highly affordable cost. Everything from the "Dura-Glide" polyethylene load bearings, to the heavy duty 3/8" equalizer cable have been carefully chosen for long lasting operation.
Any D-10 lift comes with free truck adapters - a $275 value.
Automatic Arm Restraints |
![]() |
Automatic Shut-Off Bar |
![]() |
Over-Sized Baseplates |
![]() |
Heavy-Duty Steel Cable Sheaves |
![]() |
UHMW Slide-Block Load Bearings |
![]() |
Single-Point Safety Release |
![]() |
Dual-Synchro Equalization System |
![]() |
Clear Floor Workability |
![]() |
Optional Frame Cradle Pads |
![]() |
Baseplate Adapter Seats |
![]() |
Free Truck and Van Adapters |
![]() |
Industrial-Grade Power Unit |
![]() |
Manufacturer's Website
Full Manufacturer's Specifications and Features
Download the Instruction Manual Here
See also Choosing Your Two-Post Lift and Types of Two-Post Lift
Product Features
10,000 lbs lifting capacity Wide or narrow configuration Specifically designed with posts that are rotated in 30 degrees to offset the vehicle center point back for ease of entry into the vehicle Narrow space saving design works perfectly in almost any sized repair bay Equalization system maintains equal lifting Maintenance-free polyethylene load bearings Single-piece columns for added strength Dual hydraulic cylinders combined with "direct-drive" lifting system provides 2-to-1 lifting speed and rugged dependability Comes standard with truck and van adapter set Includes detailed installation and maintenance instructions, graphic safety and maintenance decals and safety instruction placard guidelines. Oversize column base plates provide strong support Safety locks in each column spaced every three inches Heavy-duty 3/8" equalizer cables Manufacturer's WebsiteTechnical Specs
- Weight: 1865 kg
- Lifting Capacity: 10,000 lbs. / 4546 kg.
- Style: Wide Asymmetric
- Overall Height: 145" / 3683 mm.
- Overall Width (Outside of Base plates): 143 ½".
- Overall Width (Outside of Columns): 136 ½".
- Width Between Columns: 112 ¾".
- Minimum Reach (Front Arm): 29.3" / 744 mm.
- Maximum Reach (Front Arm): 43.7" / 1110 mm.
- Minimum Reach (Rear Arm): 40.3" / 1024 mm.
- Maximum Reach (Rear Arm): 58" / 1474 mm.
- Minimum Pad Height: 4-1/2" / 114 mm.
- Rise: 69" / 1753 mm.
- Maximum Lifting Height (Pad Only): 73" / 1854 mm.
- Maximum Lifting Height (Pad & 6" Adapter): 79" / 2007 mm.
- Drive Thru Clearance: 100"
- Motor: 220 VAC 60Hz. 1Ph
Manuals Books & Other Support Files

You may also be interested in the following products
Prices and specifications subject to change without notice.